 |
|
|
 |
|
|
| PRODUCT GUIDE |
|
|
|
| CV10K
/ CV20K Tile Roof Vents |
|
The Harcon low profile Cowl roof vent
offers unobtrusive low or high level ventilation in tile
roofs. The Cowl roof vent can blend almost invisibly to any
roof: new build or conservation, because of Harcon’s
unique colour and texture matching service.
The low profile Cowl roof vents incorporate a factory fitted
round felt sleeve which penetrates the felt, so no extra
sleeve is required.This round sleeve significantly reduces
the felt tearing that can occur around rectangular spigots.
|
|
 |
|
|
|
|
| CV10K
/ CV20K Slate Roof Vents |
|
| The Harcon low profile Cowl roof vents
for slate roofs offer unobtrusive low or high level ventilation.
To suit either 600 x 300mm or 500mm x 250mm slates, both
sizes fitted with round integral felt sleeve. Other sizes
available to order. |
|
 |
|
|
|
|
| CP10K /
CP20K Pipe Terminals |
|
The COA1 adaptor can be simply site clipped to
the cowl roof vent spigot, thus forming the pipe terminal
for soil or extractor pipes.
The adaptor offers a 110mm dia. outlet as standard,
this can be cut down to provide a 125mm dia. section
if needed. |
|
|
|
| CT1C Flexitube |
|
| The Harcon flexitube is a high quality, durable
product. It connects pipe terminals to 110mm dia.
soil or extractor pipes; pressure tested in accordance
with BS5250. Supplied compressed and netted with
fixing clips. |
|
|
 |
|
|
|
|
| FW1 Felt Weir |
|
| It is always necessary to cut
and fold back the felt before fitting a roof vent. If this
is done by following the Harcon fixing instructions no
leakage will occur. However a ‘felt weir’
is available as an extra safeguard, it guides any condensation
or rain water coming down the felt away from the vent
opening. |
|
 |
|
|
|
|
|
|
|
